Introduction to Taiwan NCC Certification

　　NCC is the abbreviation of The National Communications Commission, which mainly controls communication information equipment circulating and used in the Taiwan market:
       1. LPE: Low Power Equipment is a low-power device (for example, Bluetooth, WIFI-type devices);
       2. TTE: Telecommunications Terminal Equipment is a communication terminal device (for example, mobile phones, tablet devices).

NCC certified product range:

　　1. Low-power RF motors operating at frequencies from 9 kHz to 300 GHz, such as wireless network (WLAN) products (including IEEE 802.11a, b,), UNII, Bluetooth products, RFID, ZigBee, wireless keyboards, wireless mice, Wireless headset microphone, radio, radio remote control toy, various radio remote controls, various wireless alarms, etc.
      2. Public switched telephone network equipment (PSTN) products, such as wired telephones (including VOIP Internet telephony), automatic alarm equipment, telephone answering machines, fax machines, remote control devices, wired telephone wireless main and auxiliary machines, and key telephone systems , data equipment (including ADSL equipment), incoming display terminal equipment, 2.4GHz radio frequency telecommunications terminal equipment.
      3. Land Mobile Communication Network Equipment (PLMN) products, such as wireless broadband access mobile station equipment (WiMAX mobile terminal equipment), GSM 900/DCS 1800 mobile telephones and terminal equipment (2G mobile phones), third generation mobile communication terminals Equipment (3G mobile phone), etc.

NCC logo ratio description

　　NCC logo production method:
       1. It should be placed on the surface of the equipment in an appropriate proportion, or printed on the surface of the equipment. There is no large size, and the small size is specified by Zui.
       2. This NCC logo, together with the verification pass number, shall be attached to the product as required. The frequency is single and must be clear and easily identifiable.
Verification of qualified label production examples
In order to meet the needs of Taiwan's trade facilitation and customs clearance, the revised conformity label pattern for telecommunications-controlled radio frequency equipment and telecommunications terminal equipment will be revised as follows from January 1, 1995: low-power RF motors that have passed the verification number before December 31, 1994. And wireless telecommunication terminal equipment, if you need to convert the verification pass number into the 95 new code type (pass code)

NCC certification process

　　1. The entrusting party provides product information to the organization to evaluate the quotation
       2. The entrusting party confirms the return of the quotation, fills in the application form, provides samples, materials, arranges the payment, and the institution opens the case.
       3. Arrange product forecasts and review data
       4. If there are problems with the test and data, arrange for rectification and retesting until qualified.
       5. After the test and the data are qualified, the issuing authority will conduct a witness test.
       6. After the witness test is completed, the issuing authority issues a test report and issues the certificate.
       7. The entrusting party pays the money (the last paragraph), gets the certificate report, and closes the case.

Apply for Taiwan NCC Certification Preparation Information

　　1.Product circuit schematic
       2. Product block diagram
       3. Product specification
       4. Product specification
       5. BOM
       6. Service Application Form
       7. Factory ISO9001 certificate
       8. Antenna specification

For wireless product certification, the principle of Zhongjian Testing is professional, preferential and fast! Create China's wisdom and make the world more trustworthy! All wireless certifications, you can consult the Zhongjian detection sales elite, welcome everyone to call, Zhongjian detection is looking forward to working with you!